Siwenoid Wiki - swnd1

algorex_lan_communication

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T07:56:19+00:00

Algorex LAN communication UDS1100 device server [UDS1100] Siwenoid uses a Lantronix UDS1100 server to communicate with the Siemens Algorex CS11 system. For this, the UDS1100 must be updated to a special firmware which is provided by our company. After the update Siwenoid can connect to an UDS1100 through

archive_playback

Anonymous (anonymous@undisclosed.example.com) — 2024-07-24T10:30:54+00:00

Archive Playback Usage [Archive viewer] The Archive viewer can be reached this way: Right click on the main screen > Show Devices > Archive viewer [Drag it] To use the viewer, you have to drag it into a cell of the matrix. [Channel] The channel, whose recordings you need, have to be dragged in the same cell, as the viewer.

backup_restore

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T08:14:04+00:00

Backup restore Restoring server and database from backup Before restore If you want to restore the application from a Safety_backup (f.e. after PC change, reinstall) first you have to do is make a clean install of the software. ( → Express installation or Manual installation). After a clean install you have to start the installer again. On the first page you'll see:

bosch_configuration

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T07:56:34+00:00

Bosch configuration Configuring Bosch FPA5000 control unit Bosch FPA5000 uses ethernet port to communicate with Siwenoid. In FSP5000 create an FSI server node under nodes. [Create] ---------- (The default Net Node, Group and RSN must be ok) Edit FSI server node's ip properties, this IP Address will be the remote PC's IP. Multicast Address is also neccessary for siwenoid so as Port Number.

cctv_configuration

Anonymous (anonymous@undisclosed.example.com) — 2024-07-23T08:44:33+00:00

CCTV configuration ---------- DVR's and IP cameras can be integrated into SIWENOID. Different type of DVR's are supported. Protocol can be selected during DVR definition. MPEG4 and H264 stream of IP camera is supported. DVR definition ----------

cerberuspro_configuration_new

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T07:18:45+00:00

CerberusPro configuration new Previous -> CerberusPro configuration Next -> CerverusPro SAFEDLINK configuration

cerberuspro_configuration

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T07:58:43+00:00

CerberusPro configuration Configuring CerberusPro in stand alone mode CerberusPro (SIEMENS) control unit uses Bacnet protocol to communicate with Siwenoid. Communication settings can be done in FXS72xx editor of CerberusPro control unit. [Network] Open network settings of a CerberusPro. In this tutorial we discuss a basic configuration when a SIWENOID and a CerberusPro control unit are in the same network segment.

cerberuspro_safedlink_configuration

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T07:19:36+00:00

CerberusPro SAFEDLINK configuration Previous -> CerberusPro configuration new Next -> Esser configuration

channels

Anonymous (anonymous@undisclosed.example.com) — 2024-07-24T09:23:02+00:00

Channels Channels represent the cameras pluged into the recorder. Channel usage [Show devices] Channels can be reached this way: Right click on the main screen > Show Devices [List] You can list the channels used by the selected recorder, if you click the “+”

config_fiel_parameters

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T08:13:12+00:00

Config file parameters Szerver parancssori paraméterei A szerver indításához minimálisan a java -jar Siwenoid.jar parancs szükséges. A további paramétereket a java és a -jar közé kell megadni. Főbb beállítási lehetőségek: * -Dsiwenoid.registry.port=1099

containers

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T07:53:20+00:00

Containers Phylosophy of containers The tree structure of the data points is based on containers. The containers are not data points of the physical subsection. Containers are logical parent nodes of physical datapoints or other containers. The containers always inherit the status of their childrens datapoints.

create_map

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T07:55:12+00:00

Create map Datapoints can be shown on maps as dynamic icons. A map always contains a background image and several foreground dynamic symbols. Create a map [Menu] Use Menu->Maps->New map... to create a new map. An empty map opens. [Size]First, you should use a picture as a map, select

datapoint_definition

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T07:54:03+00:00

Datapoint definition Datapoint definition can be done in two ways. You can: * Automatically import a specific subsystem's metafile * Manually define the datapoints Different subsystems require their own method. SIEMENS Algorex datapoint import

datapoint_settings

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T07:54:17+00:00

Datapoint settings Datapoint movement [Move up] In treeview use popup menu to move up or down by one datapoint. You also can move it by dragging and dropping. Datapoint custom name [Edit name] In tree view right--click on the datapoint to change its name in the popup menu. This change will take affect only on the management level. During a subsequent import these names won't be changed even if they were changed on a subsystem level. Take special care of these datapoints during import.

datapoint_treatment

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T07:54:29+00:00

Datapoint treatment Algorex datapoints are associated (linked) with treatment tables. These tables define the behavior of datapoints on different recieved statuses. The behavior of datapoints can mean the following: * event category * eventlist color

detectomat_configuration

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T08:01:48+00:00

Detectomat configuration Configuring Detectomat fire alarm system Detectomat fire alarm systems can connect to Siwenoid through the standard RS232 programming port, or through the RS232 port of BMZ Master modul. Most of newer computers haven't got any serial (RS-232) connection. Thatswhy we need a TCP-IP to RS-232 converter. In this configuration tutorial, we use Lantronix and an ATC-1000 converter.

dsc_configureation

Anonymous (anonymous@undisclosed.example.com) — 2024-07-23T06:50:59+00:00

DSC configuration ---------- Ahhoz hogy Siwenoidhoz tudjunk csatlakozni a képen látható beállításokat kell elvégeznünk. Az használható a titkosításból a 2. típus is, ebben az esetben az ahhoz tartozó kulcsot kell Siwenoid-ba beírni konténer létrehozásakor.

dvr_nvr_connections

Anonymous (anonymous@undisclosed.example.com) — 2024-07-24T11:08:47+00:00

DVR-NVR connections The Siwenix communicates with the recorders (DVR and NVR) only through TCP-IP protocol. This requires that the recorders are properly configured (especially Network and Users). For more information check the documentation of the recorder.

esser_configuration

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T07:59:00+00:00

Esser configuration Configuring ATC-1000/2000 It ensures a RS-232 connection to Integra panel. Most of newer computers haven't got any serial (RS-232) connection. Thatswhy we need a TCP-IP to RS-232 converter. In this configuration tutorial, we use an ATC-1000 converter.

express_installation

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T08:12:17+00:00

Express installation Launch express installation Express installation is possible if: * you have no any existing MySQL installation on the PC * you don't want to define special installation folder, port number * user name of your windows account doesn't contain space or special characters

fc360_configuration

Anonymous (anonymous@undisclosed.example.com) — 2024-07-23T06:50:25+00:00

FC360 configuration ---------- Központ és a Device server bekötése / beállítása ---------- Siwenoidhoz való csatlakozásthoz szükségünk lesz egy RS485 modulra a központba, és hozzá egy bármilyen Device serverre (ATC-Lantronix-Moxa).

first_siwenoid-startup

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T08:12:36+00:00

First SIWENOID startup Launch of applications [Enter] Server and client applications can be launched by start-server.bat and start-client.bat files that are located in the root directory of server and client installations. At the first start of server the system prompt to create a user with admin rights. Both user name and its password are up to you.

galaxy_dimension_configuration

Anonymous (anonymous@undisclosed.example.com) — 2024-07-22T13:27:18+00:00

Galaxy Dimension configuration ---------- Configuring Galaxy control unit ---------- Galaxy Dimension uses internal RS232 port to communicate with Siwenoid. Use GD editor tool to set some parameters. [GaD_group_mode.png] In Group Mode set Enable Groups (program step:63-Options 1-1-1).

generated_scripts

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T07:11:17+00:00

Generated scripts Map auto open In Menu -> Scripts -> Generated scripts To create a new script click on the “Create new” button. [Generate script] Previous -> Create map Next -> Print event

global_fire_configuration

Anonymous (anonymous@undisclosed.example.com) — 2024-07-22T12:55:22+00:00

Global Fire configuration ---------- Galaxy Dimension configuration

groups

Anonymous (anonymous@undisclosed.example.com) — 2024-07-24T09:29:54+00:00

Groups With Groups you can handle multiple channels simultaneously. Add Group The Add Group button can be reached this way: Right click on the main screen > Show devices button > Add button > Add Group [Add] Here we can select with drag and drop which channels to add to the group

installation_under_windows

Anonymous (anonymous@undisclosed.example.com) — 2024-07-24T11:04:58+00:00

interface_settings

Anonymous (anonymous@undisclosed.example.com) — 2024-07-24T11:09:49+00:00

Interface settings Management panel [Management panel] The Management panel can be reached this way: Right click on the main screen > Show Devices [Drag] To use the Management panel, drag it into a cell of the Matrix. The left box on picture represents our screen, the right box represents our recorder called Test.

lantonix_configuration

Anonymous (anonymous@undisclosed.example.com) — 2024-07-23T07:22:58+00:00

Lantronix configuration ---------- UDS1100 device server configuration ---------- [Telnet] The configuration of device can be done through LAN by telnet client. Telnet client is installed in any Linux distribution. In case of Windows sometimes it is not installed by default. It can be added in Control panel as a new Windows component. Use command line to launch telnet 9999. Where is the IP address and 9999 port is the service port of Lantronix de…

layout_templates

Anonymous (anonymous@undisclosed.example.com) — 2024-07-24T09:49:45+00:00

Layout templates Layout usage [Usage] Layouts can be found under the Layout templates menu, after you right click on the main screen. Here you can find the default templates, you can add a new template, save a personal layout for later use. If you click on the Clear screen button, all the channels can be cleared from the matrix.

licensing

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T08:02:40+00:00

Licensing License menu [Menu] Use license information menu in main menu. Trial license information [Informations] Without any dongle the software runs in trial mode. In trial mode a certain number of datapoints and client connections are allowed for a limited time. Connect USB dongle and select green add button to register a dongle and its license.

lst_configuration

Anonymous (anonymous@undisclosed.example.com) — 2024-07-23T09:17:55+00:00

LST configuration ---------- hu.siwena.plugin.lstnative.client.LSTNativePlugin Insert the previous line into client config in plugins part, so you will get a new menu item when you right click on LST container what makes you able to create a file that will be suitable for original import.

management_panel

Anonymous (anonymous@undisclosed.example.com) — 2024-07-24T10:19:32+00:00

Management panel [Management panel] The Management panel can be reached this way: Right click on the main screen > Show Devices [Use] To use the Management panel, drag it into a cell of the Matrix. The left box on picture represents our screen, the right box represents our recorder called Test.

manual_installation

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T08:12:00+00:00

Manual installation Launch manual installation Manual instalaltion is necessary in the following case: * you already have MySQL installation on the PC * you want to use existing MySQL instance as your database server * You want to install only server or only client on a PC

map

Anonymous (anonymous@undisclosed.example.com) — 2024-07-24T10:47:14+00:00

Map How to use the maps [Map] The Maps can be reached this way: Right click on the main scren > Show Devices > Maps You can add a new map this way: Right click on the main screen > Show Devices > Add button > Add Map [New map] When you add a new map, you have to give it a name, and a filepath. You can invert the colors of the map, to work easier with it.

matrix_interface

Anonymous (anonymous@undisclosed.example.com) — 2024-07-24T09:35:08+00:00

Matrix interface The matrix is the container of the channels we'd like to display. Its shape, and partition can be freely edited. Channels can be displayed by draging them into a cell. The type of the cells can be changed from the Device list, with an altering field. These can be the following:

notifier_configuration

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T08:02:02+00:00

Notifier configuration Old AM6000 Sib [Old] New AM6000 Sib [New] Moxa configuration [Moxa] After you configured the Sib card on the control panel. There is an SD card inside the device that you have to mount and edit the config file. Edit this config file with Notepad++. There you can set up ip address, netmask, dns, and password for moxa's communication. (That password is required for moxa-siwenoid communication). MOXA's default port is 4002.

object_permissions

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T07:56:01+00:00

Object permissions Important: By default, each datapoint can be accessed by any user. If you include a datapoint/treatment/command in a permission then it will be reachable only for those users that have permission. Create a new permission Use Menu

paradox_configuration

Anonymous (anonymous@undisclosed.example.com) — 2024-07-23T07:01:06+00:00

Paradox configuration ---------- Configuring Paradox EVO192 ---------- Paradox EVO192 can connect to Siwenoid through a Paradox PRT3 interface modul. It ensures an RS-232 connection to Paradox panel. Most of newer computers haven't got any serial (RS-232) connection. That's why we need a TCP-IP to RS-232 converter. In this configuration tutorial, we will use an ATC-1000 converter.

print_event

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T07:55:37+00:00

Print event Print events Preferred printer type: EPSON TM-T20II SERIES In Menu -> Scripts -> Generated scripts To create a new script click on the “Create new” button. [Create new] Previous -> Generated scripts Next -> User permissions

project_backup_restore

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T07:56:47+00:00

Project backup/restore Creating Backup You can create a backup from the application and the database by the installer's “Backup” function. After selecting the application, (server or client) we have to mark what parts of the system we would like to backup.

ptz_functions

Anonymous (anonymous@undisclosed.example.com) — 2024-07-24T11:17:45+00:00

PTZ functions A PTZ camera (pan–tilt–zoom camera) is a camera that is capable of remote directional and zoom control. Setting up PTZ [Setting up] To set up the PTZ follow these instructions: Right click on the main screen > Show Devices > “+” button next to the device > Right click on the selected channel > Edit channel

running_siwenix

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T07:32:11+00:00

Running Siwenix ---------- Starting the system Requirements Base requirements: * Windows 7 or 8, 32 or 64bit * Java JRE 1.8.20 (JRE 8 update 20) or newer * Microsoft Visual C++ Runtime 2005 or newer Wavestore module: * Wavestore SDK Minimum hardware requirements:

safety_backup

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T08:13:35+00:00

Safety backup Backup server application [Backup] Select “Backup” and then “Next >>”. [Server application] Select server application to backup and then “Next >>”. [Components] Select server application components and then “Next >>” [Select source] Select source folder for server backup. Use

satel_configuration

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T08:00:11+00:00

Satel configuration Configuring Satel Integra Satel Integra can connect to Siwenoid through a Satel INT-RS interface modul. It ensures a RS-232 connection to Integra panel. Most of newer computers haven't got any serial (RS-232) connection. Thatswhy we need a TCP-IP to RS-232 converter. In this configuration tutorial, we use an ATC-1000 converter.

script_samples

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T07:32:25+00:00

Script samples Previous -> Tips and tricks

settings

Anonymous (anonymous@undisclosed.example.com) — 2024-07-24T11:04:52+00:00

Settings Displays [Display1_en.JPG] In this section you can set, how many screens you'd like to use. You can set only as many you have plugged into your computer. Display settings [Display2_en.JPG] In this section, you can set, which Layout to load in, when you start the application. Here you can enable or disable the transport bar, and whether import the channels from the template or not.

sintony_configuration

Anonymous (anonymous@undisclosed.example.com) — 2024-07-23T09:15:34+00:00

Sintony configuration ---------- Sintony configuration with Sylcom ---------- To be able to connect to the control panel with Sylcom, we will need a SAQ11 programming cable, which we need to connect to port J7 on the SI410 motherboard, the other end to the pc!

siwenix_user_interface

Anonymous (anonymous@undisclosed.example.com) — 2024-07-24T08:44:34+00:00

Siwenix user interface [Welcome] When the application starts, this area welcomes us, this is the main screen. There are two main element here: * Matrix interface * Transport bar [Menu] On right click a menu pops up, where you can find options for the matrix, and Layout templates, which you can use, to rearrange the matrix.

snmp_configuration

Anonymous (anonymous@undisclosed.example.com) — 2024-07-23T09:05:29+00:00

SNMP configuration ---------- Add a datapoint to SNMP server ---------- [Add] Select the node you want to manage by SNMP in datapoint hierarchy, press right click and select the Add to SNMP server option from the pop-up menu. Multiple selection is possible by holding Ctrl key during selection of datapoints.

spc6xxx_configuration

Anonymous (anonymous@undisclosed.example.com) — 2024-07-22T12:53:28+00:00

SPC6xxx configuration ---------- Configuring SPC5300 from internet browser ---------- Setting up Internet Explorer ---------- The SPC system can only be configured from Internet Explorer. Before connecting to the SPC make sure that SSL3 encryption

texecom_elite_series_configuration

Anonymous (anonymous@undisclosed.example.com) — 2024-07-23T08:00:48+00:00

Texecom Elite series configuration ---------- Configuring Texecom Elite series ---------- Texecom Elite control unit needs to be set up to communicate with Siwenoid using the Wintex UDL provided by Texecom Ltd. Version 5.6 or newer is recommended. You have to use it with english language setting in order to be able to use the metafile import feature of siwenoid. Language settings can be found in the setup menu under language, effectively changing the language of the application may involve a…

texecom_premier_816_832_configuration

Anonymous (anonymous@undisclosed.example.com) — 2024-07-23T07:42:37+00:00

Texecom Premier 816/832 configuration ---------- Configuring Texecom Premier 816 ---------- Texecom Premier 816 control unit needs to be set up to communicate with Siwenoid using the Wintex UDL provided by Texecom Ltd. Version 5.6 or newer is recommended. You have to use it with english language setting in order to be able to use the metafile import feature of siwenoid. Language settings can be found in the setup menu under language, effectively changing the language of the application may i…

tips_and_tricks

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T07:31:07+00:00

Tips and tricks Previous -> Troubleshooting Next -> Script samples

transport_bar

Anonymous (anonymous@undisclosed.example.com) — 2024-07-24T10:14:08+00:00

Transport bar Control panel [Control panel] With the control buttons we can jump to certain recordings. If you double click any element of the date, or the time, you can set a custom time, or date, where we can jump to with the Go button. A +1 and -1 button can be found as well on the panel. With them you can add +-1 day to the setted day. With the today buton you can return to the present day.

troubleshooting

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T08:14:33+00:00

Troubleshooting Server client startup errors [Mysqlhiba1.png] You will see this error if Siwenoid mysql service is not running! Go to Task manager, click on the Services! Click on MySql for Siwenoid with right mouse button, than click “Start”. [taskmanger.png] If "MySql for Siwenoid" is not on the list, or return to Stop status, do the following:

user_manual_mx_guard

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T08:09:24+00:00

User manual [Siwena‎] Welcome to SIWENOID online User Manual. This documentation mainly targets operators who has to handle the system. But it is useful for engineers who has to know the terminology of user interface. Naming of user interface Entire documentation use the following terms of the different part of user interface.

user_manual_sndroid_client

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T08:09:51+00:00

User manual - Android client To use this client application You must have Siwenoid server (v1.17.2963 or later) and Android Tunnel started in server settings. After opening the Application, login screen will appear: [Log in ] You should type the server’s IP address (or

user_manual

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T08:07:19+00:00

user_permissions

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T07:55:45+00:00

User permissions Create new user From the main menu select Users->New user... to create a new user. In the dialog fill in the appropriate fields. User personal data can be modified later by using Menu->Users->“John Smith”->Edit user. [Create] Edit permissons

version_upgrades

Anonymous (anonymous@undisclosed.example.com) — 2024-07-25T08:14:17+00:00

Version upgrades Important! Always make backup before upgradeing the software! Upgrade of server application [Update] Select “Update” and then “Next >>”. [Server application] Select Siwenoid server application to update then “Next >>”. [Select destination] Select destination folder for server upgrade. Use

workspace_object_tracking

Anonymous (anonymous@undisclosed.example.com) — 2024-07-24T10:38:00+00:00

Workspace - Object tracking Tracking Viewer [Tracking viewe] The Tracking viewer can be reached this way: Right click on the main screen > Show Devices > Tracking viewer To use it, you have to drag this device into a cell of the matrix. [Ready] If you dragged it into a cell, it's ready to use.